Knowledge

Home > Knowledge > Content
Centrifugal Polisher - Grinding and polishing machine that enables rapid polishing of workpiece surfaces
Nov 23, 2018

The centrifugal grinding and polishing machine uses the centrifugal force principle to achieve high-speed polishing of the workpiece in the grinding vessel. It uses the chain and gear to drive the rotation of the main shaft. The four hexagonal grinding containers rotate and revolve in the large circle of the main shaft, which promotes the grinding of the grinding object in the high-speed grinding state, thereby realizing the workpiece in the working container and grinding and polishing abrasive. The polishing object achieves high-speed turning and mutual friction to achieve polishing of the surface of the workpiece.


The big difference between the centrifugal grinding and polishing machine and the other polishing machine is that the centrifugal grinding and polishing machine has four barrels of machine, the four grinding container barrels work at the same time, the workpiece and the polishing and grinding materials such as grinding and polishing abrasive, polishing slurry, The cleaning agent, the polishing brightener and the like are placed in the barrel of the grinding container, and the four grinding containers are in a sealed state under the working condition, so after the high-speed rotation, the heat in the grinding barrel is relatively high, so the polishing speed thereof Relatively fast. The centrifugal grinding and polishing machine not only deburrates the workpiece quickly, but also has a good effect on the surface finish of the workpiece. It is a corrector in the grinding and polishing machine. The centrifugal grinding and polishing machine is ideal for surface polishing of metal workpieces. It is often used for bright polishing of workpieces because of the volumetric relationship of the grinding vessels, which are often used for surface treatment of small workpieces. Such as hardware workpieces, mechanical gadgets, etc., can also be used for the surface polishing of glasses, jewelry and other workpieces.


Although the centrifugal grinding and polishing machine is divided into four barrels, its operation is very convenient. On the machine's control panel, there are buttons for speed, time, etc. You can set the working time of the machine, and you can adjust its working speed at will during operation.


In order to better use the centrifugal grinding and polishing machine, the four grinding container barrels of the centrifugal grinding and polishing machine are made of wear-resistant polyurethane material as the inner lining. If the inner lining is worn out due to excessive use time, it can be used at any time. Replacement will not affect the work of the machine. Centrifugal grinding and polishing machine is the ideal equipment for the surface treatment of small metal workpieces.








Copyright © Zhejiang Jiebo Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-574-22757666